Discount Auto Tools Catalog

Win Valve Spring & Rocker Arm Combo Similar to 10102, 8516A, 8387

Win Valve Spring & Rocker Arm Combo Similar to 10102, 8516A, 8387 image

Product #: 3747-123 DLT


Your Price: $29.99


Brand: Win Tools

The Win 3747-123 is a combination 3-in ONE similar to the Miller 10102 that does the job of the 8426, 8387 and 8516A used on 3.7 and 4.7 Dodge engines. It's a Valve Spring Compressor and a Rocker Arm Tool combination used in place of the Miller 8426, 8387, 8516A and 10102 for Jeep, Dodge, Chrysler 3.7 and 4.7 engines. The original Mopar Miller numbers are 8426, 8387 and 8516. The Win brand is similar but stronger than the originals! The Miller numbers are listed repair manuals. The 3747-123 (like Miller 8426, 8387 and 8516A). It's a specialty tool used to compress the valve springs and access the keeper which is needed when changing the valve springs. Also can be switched over to the Rocker Arm Tool when you don't need to access the keeper. Use of this tool is safely done without damage to the camshaft or camshaft lobes. There's a partial application below, however this tool works on 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 and 2013. Refer to a service manual for detailed instructions on use.

  • 2006 (DR, HB, KJ, ND, WK, XK) - Systems (9 - Engine, 3.7L, 9 - Engine, 4.7L)
  • 2007 (DR, HB, HG, KA, KJ, ND, WK, XK) - Systems (9 - Engine, 3.7L, 9 - Engine, 4.7L)
  • 2008 (DR, HB, HG, KA, KK, ND, WK, XK) - Systems (9 - Engine, 3.7L, 9 - Engine, 4.7L)
  • 2009 (DS, HB, HG, KA, KK, ND, WK, XK) - Systems (9 - Engine, 3.7L, 9 - Engine, 4.7L)
  • 2010 (DS, KA, KK, ND, WK, XK) - Systems (9 - Engine, 3.7L, 9 - Engine, 4.7L)
  • 2011 (DS, KA, KK, ND) - Systems (9 - Engine, 3.7L, 9 - Engine, 4.7L)
  • 2012 (DS, KK) - Systems (9 - Engine, 3.7L, 9 - Engine, 4.7L)
  • 2013 (DS) - Systems (9 - Engine, 4.7L)

Question - Do you have an air hose for compressed air to hold the valve up so it doesn't fall in the cylinder when I remove the keeper and spring?

Answer - Yes. The LIS19700 Valve Holder is commonly purchased along with the 3747-123. *Note if not removing the keeper, like when you are just putting the rocker arm in, the air valve may not be needed. Always follow repair manual instructions.

Question - What's the difference between the Miller 10102 and the Win 3747-123, they look practically the same?

Answer - The Win 3747-123 is very similar to the Miller 10102, in fact they are the same size and diameter. Use in applications when either the 8426 or the 8387 is called for in the repair manual. The Win Tool is stronger and works just like the Miller 8426 and 8387, at a lower cost. The 3747-123 has more function since it can be used to change broken valve springs or just to install replacement rockers or lifters. That's why most customers choose the Win 3747-123 because it can be used when a 10102, 8426, 8387 or 8516A is needed.

Question - Can I just use a "universal" valve spring compressor to do the same thing?

Answer - No. We have searched with all of our suppliers to find a universal type valve spring compressor and there's not one available that works for 3.7 and 4.7 Mopar engines. The best tool for doing rocker arm replacement, valve spring replacement, cam swaps etc is the Win 3747-123 that can be used when a Miller 8426, 8387 or 8516A is called for in a service manual. The Win 3747-123 offers a much lower cost alternative.

Question - Does this rocker arm remover work on Pentastar 3.6 engines?

Answer - No. There is not one made for the 3.6 Pentastar engine. The design does not allow. Shops typically purchase the Pentastar Combo kit, which includes timing chain holders, phaser locks and a crank holder, to save time from disassembling the front of the engine. See the product by clicking the following Pentastar Combo.

Question - Does the 3747-123 work on Ford 4.6, 5.4 and 6.8 2V engines?

Answer - No. The 303-581 works on the 4.6, 5.4 and 2V SOHC engines. (SOHC means Single Over Head Cam and that there is one cam over each cylinder head)

For 5.7 Hemi engines see the Miller/Mopar 9065 Valve Spring Compressor.

Image 5.0 stars out of 5
Same design as Miller

I'm an ex Chrysler dealer tech and this is the same design as Miller at a MUCH lower cost. Very good quality and works for rocker arm replacement or valve springs. Size of foot attachment works for either larger or smaller diameter valves found in 3.7 and 4.7 engines due to the inner U shaped part being the right size for either, making it work in place of a 8426 or 8387. 

Reviewed Fri, Jun 30 2017 7:44 am by
Write a Review