Shipping time usually 2-3 days, call for faster shipping. These new Timing Chain Holders are used as wedges to loosen the tension on the Timing Chains during Camshaft and Phaser service procedures on the 3.6 L Engine. NOTE: 10200-1 & 10200-3 are used on Driver’s Side 10200-2 is used on Passenger’s Side. Commonly purchased with 10202.

*Notice - 2012 and newer models also require 10369A. Also see combo 10200-0269. 

Some 2011 models may also require 10369A, depending on the size of bolt #4 in the front cover tightening sequence on the right bank (cylinder head closest to firewall). If that bolt head is 13MM you need 10369A. If it is 10MM you shouldn't need it. See our 10369A available separately.

• 2011 (Journey, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, Challenger, Charger, 300, 300C, Charger, Magnum, Caravan, Grand Caravan, Town & Country, Durango, Grand Cherokee) - Systems (9 - Engine, 3.6L)
• 2012 (Journey, Wrangler, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, Challenger, Charger, 300, 300C, Charger, Magnum, Caravan, Grand Caravan, Town & Country, Durango, Grand Cherokee) - Systems (9 - Engine, 3.6L)
• 2013 (Ram Truck 1500, Journey, Wrangler, Wrangler, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, Challenger, Charger, 300, 300C, Charger, Magnum, Caravan, Grand Caravan, Town & Country, Durango, Grand Cherokee) - Systems (9 - Engine, 3.6L)
• 2014 (Ram Truck 1500, Journey, Wrangler, Wrangler, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, KL, Challenger, Charger, 300, 300C, Charger, Magnum, Caravan, Grand Caravan, Town & Country, VF, Durango, Grand Cherokee) - Systems (9 - Engine, 3.0L Gasoline, 9 - Engine, 3.2L, 9 - Engine, 3.6L) VW Routan 3.6.