Circuit Testers, Short Finders

Power Probe PPH1 The Hook Circuit Tester

Power Probe PPH1 The Hook Circuit Tester image

Product #: PPRPPH1 DLT


Your Price: $499.99


Brand: Power Probe

See the video from Power Probe at the bottom of this product listing.
Large LCD screen shows 2 lines of data that makes it easy to read.
Uses standard 4mm banana jack that connects to all of Power Probe's leads and accessories.
20 ft. lead makes it easy to test the vehicle from front to rear without constantly looking for a ground hookup.
Automatically becomes an instant ohmmeter and auto ranges without manually selecting it when measuring resistence
Automatically becomes an instant voltmeter and auto ranges without manually selecting it when connecting to voltage
Automatically becomes an instant AC voltmeter along with the measured frequency. It measures from 0 to 99.9 volts and beyond 250KHz... With the HOOK managing all meter adjustments you stay focused on the task at hand.
Activates motors and components up to 100 amps inrush and can power 25 amps to a circuit continuously.
Displays the current draw in amps and resistance in ohms.
Features:
HOT SHOT MODE - Load tests power and ground connections and gives you a quick pass or fail result.
ADJUSTABLE CIRCUIT BREAKER - Can be adjusted and set from 2 amps to 65 amps. This feature lets you work in sensitive circuits to heavy loads with confidence.
VOLTAGE REFERENCE SUPPLY MODE - Supplies from 0 to 5 volts in half volt increments to the probe tip. This feature can provide a known reference (that is good) voltage to simulate sensors. It's a great compliment to your OBD scanner. The display shows both the set voltage and the tip voltage, so you can see if there is a short in the circuit.
POWER SWITCH PREFERENCES - Lets you supply constant power (no more holding the button down), pulse power or momentary power into the circuit you are testing. Maintaining continuous power on a circuit without needing to hold your finger on the power switch is one of the many advantages you will experience by using the Power Probe Hook's latching feature. It's great for testing circuit loads and voltage drop tests. Finding a buried or hidden component can be very time consuming. The Hook's power switch can be set to pulse a components circuit on and off while you devote your attention to searching it out.
THE DUAL CONTINUITY TESTER - Will allow you to test multi-pole relay contacts while you simultaneously measure the coil resistance.
Specifications:
Min Operating Voltage: 12 VDC
Max Operating Voltage: 48 VDC
Max Operating Temp:50C
Max Storage Temp: 70C
Voltage Measurement: 0 - 99.9 VDC/VAC
Ohms Measurement: .001 Ohms - 15 Meg Ohms
Amps Measurement: .001 Amps - 99.9 Amps
Max Continuous Load: 25 Amps
Max Intermittent Load: 65 Amps for 8 Sec.
Hook Up Cables: 10 Gauge
 

Write a Review