Pullers, Holders, Belt Tools

AAA Specialty Tool 50 mm Honda Acura Crank Pulley Holder

AAA Specialty Tool 50 mm Honda Acura Crank Pulley Holder image

Product #: Honda 50MM Tool DLT


Your Price: $37.48


The Honda Crank Pulley tool is a specialty tool that holds Honda and Acura crank pulleys stationary while loosening or tightening the crank pulley bolt. It is the same design, size & weight as the Snap On Blue Point crank pulley tool at about half the price! The crank pulley is also known as a crankshaft pulley, crankcase pulley, damper, dampener or harmonic balancer, after market crank pulleys designed to increase engine power are called underdrive pulleys. If you are trying to loosen the crank pulley bolt see DenLors Tools "how to" tips article including a short video of the specialty tool in use. The Honda crank pulley tool is used for removing and properly torquing the crank pulley bolt, see Our exclusive timing belt tips article.

  
  Hole in center of the specialty tool allows socket access to crank shaft pulley bolt for removal and installation of crankshaft pulley bolt, with our Honda crank shaft pulley tool. 

  Our Honda Crank Pulley tool fits most Honda and Acura engines.

  Hexagonal shape of tool fits hole in center of crankshaft pulley.

  Prevents engine from turning when held with a 1/2" breaker bar.

  Size is 50 mm, 45mm may be required only if your car is manufactured prior to 1989. Also Acura cars between 1986 and 1994 with standard transmissions may have 45mm. Automatic transmissions in those Acura vehicles will be 50mm.



We no longer sell the Powerbuilt brand due to quality issues. We warranty the Honda Crank Pulley Tool that we currently sell for life. And we've never had one fail yet!

Honda Specialty Crank Pulley Tool works on most of the following Honda and Acura's Check for a 50mm HEX Slot in your pulley if there is any doubt. See our Size and Measuring page for more info.

1990, 91, 92, 93, 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04, 05 and newer Honda Accord 2.2 L 4 cyl. 

1996 - newer Honda Accord 2.7 L V-6 

1998 - newer Honda Accord 2.3 L 4 cyl. & 3.0 L V-6 

1992 - newer Honda Civic 1.6 L 4 cyl. 

1997 - newer Honda CR-V 2.0 L 4 cyl. 

1993 - newer Honda Del Sol 1.6 L 4 cyl. (except SI w/o hexagonal slot)

2000 - newer Honda Insight 1.0 L 3 cyl. 

1995 - newer Honda Odyssey 2.2 L 4 cyl. 

1998 - newer Honda Odyssey 2.3 L 4 cyl. 

1999 - newer Honda Odyssey 3.5 L V-6 

2003 - newer Honda Pilot 3.0 L V-6 and 3.5 L V-6 

1992 - newer Honda Prelude 2.2 L 4 cyl. 

1992 - newer Honda Prelude 2.3 L 4 cyl. 

2000 - newer Honda S2000 2.0 L 4 cyl. 

1997 - newer Acura CL 2.2 L 4 cyl. 

1997 - newer Acura CL 3.0 L V-6 

1998 - newer Acura CL 2.3 L 4 cyl. 

2000 - newer Acura CL 3.2 L V-6 

1990 - newer Acura Integra 1.6 L 4 cyl. with Auto Trans. 

1992 - newer Acura Integra 1.7 L 4 cyl. with Auto Trans.

1993 - newer Acura Integra 1.8 L 4 cyl.  with Auto Trans.

1991 - newer Acura Legend 3.2 L V-6 with Auto Trans.

1996 - newer Acura RL 3.5 L V-6 

1995 - newer Acura TL 3.2 L V-6

 
Question:  Need a Crank Pully tool (honda crankshaft holder) for an 03 Honda Odyssey, 6 cylinder. Honda Part numbers are 07MAB-PY3010A and 07JAB-001020A. I see you have crank pully tools but no mention if it will work on an 03 Odyssey. Can you help?
 
Answer:  Yes. The tool numbers you are referring to are Honda factory tool numbers that are mentioned in Chilton and other repair manuals. We offer less expensive alternatives like the one on this page. We have sold many of these and have no problems with them getting the job done. See our tech article and the instructional video for more information.

Write a Review