Discount Auto Tools Catalog > Engine / Transmission Tools > Engine, Trans., and Driveline Tools > Schley Products SP 65550 GM Oil Pump Drive Removal Tool

Engine, Trans., and Driveline Tools

Schley Products SP 65550 GM Oil Pump Drive Removal Tool

Product #: SP 65550

Detailed Description:
This tool saves 1/2 hour per job.

This special tool has been designed to easily remove the oil pump drive on most G.M. V-6 engines with the intake manifold still attached to the engine block and cylinder heads. The oil pump drive is located in a very small area that is surrounded by the intake manifold and other obstructions. With this remover, the job is done easily and quickly.

Works on theses GM engines:

2.8L V-6 1987-1989

3.1L V-6 1990-1994

3100 V-6 1994-2005

3.4L V-6 1999 and later

Also See:

Alltrade / Powerbuilt Honda Valve Adjustment Tool - 10mm Jam Nut 648827
Astro Pneumatic Harmonic Damper Holder & Puller Set AP 7822
Calvan CAL 39100 Ford Spark Plug Extractor Specialty Tool
CalVan CAL31 Tools Internal Bearing Puller
Powerbuilt 50mm Honda Crank Pulley Tool, 10mm Valve Adj. Tool, Feeler Gauge
KD Tools KD 2078 Universal Overhead Valve Spring Compressor
KD Quickie Hydraulic Tappet Remover KD2114
KD Tools KD 2284 Heavy-Duty Piston Ring Compressor
KD Tools KD 2286 Harmonic Balancer Puller
KD Tools KD 2398 Automatic Transmission Clutch Spring Compressor
KD Clutch Aligning Set KD2420
KD Tools KD 2833 Engine Cylinder Hone
KD Tools KD 2897 Pulley Puller and Installer Set
KD Tools KD 3271 Deluxe Universal Overhead Valve Spring Compressor
KD Ford Clutch Coupling Tool KD3413
KD Tools KD 3840 CamClamp - Universal Timing Gear Locking Tool
KD Tools KD 41770 Oil Pump Primer
KD Tools KD 492 Oil-Seal Remover & Installer
KD Tools KD 505 Valve Lapping Tool
KD Tools KD 850 Piston Ring Compressor Set
KD Air Hold Fitting Set for Valve Spring Replacement KD 901
KD Tools KD 912 Valve Spring Compressor
Lisle LIS11750 Clutch Coupling Remover for Ford
Lisle LIS13000 Exhaust Manifold Spreader
Lisle LIS16750 Valve Spring Compressor
Lisle LIS18000 Universal Camshaft Bearing Tool
Lisle LIS19500 Ring Compressor - Range 2-1/8" to 5"
Lisle LIS23500 Engine Cylinder Glaze Breaker - Stone Type
Lisle LIS27000 Sneak Pete - Rear Main Seal Remover/Installer Kit
Lisle LIS36200 Valve Keeper Remover & Installer
Lisle LIS36880 Dual Overhead Cam (DOHC) Lock Tool
Lisle LIS38220 Universal Cam Adjuster
Lisle LIS48500 Push Rod Remover
Lock Technology LT 865 Spark Plug Piston Lock
OTC Stinger Clutch Alignment Tool Kit - 17 Pc. OTC 4528
OTC Stinger Freeze Plug Remover / Installer Set OTC 4603
OTC Diesel Glow Plug Removal Tool Set OTC 6005
OTC 6267 GM / Chrysler Crank Pulley / Damper Puller
OTC Ford Cam Alignment Tool OTC 6467
OTC Ford Cam Sensor Synch Tool OTC 6469
OTC Ford Cam Sensor Synch Tool OTC 6472
OTC Ford Cam Sensor Synch Tool OTC 6474
OTC Ford Cam Gear Holding Tool OTC6478
OTC Ford Camshaft Gear Set OTC6485
OTC Ford Cam Positioning Master Tool Set OTC 6489
OTC Ford 4.6L 4-Valve Cam Timing Kit OTC 6498
OTC 6689 Chrysler / Jeep Master Cam Alignment Tool Set
OTC Clutch Adjusting Wrench for Spicer Clutches OTC 7028
OTC Truck Clutch Alignment Shaft OTC7480
OTC Ford Valve Spring Compressor Tool OTC 7928
Robinair ROB92500 Transmission Fluid Exchanger
SK 2-In-1 Oil Pressure and Signal Socket - 3/8" Drive SK 4488
Schley SP 62900 Valve Stem Seal Pliers
Schley SP 64900 Universal GM, Chrysler, Mitsubishi Harmonic Damper Pulley Puller
Schley SP65500 Toyota Lexus V6 Cam Seal Tool
Schley Products SP 65550 GM Oil Pump Drive Removal Tool
Schley SP 92350 Narrow Access Valve Stem Seal Removal Pliers
Schley SP 98450 Harmonic Damper Pulley Holding Tool for Chrysler Engines
Sunex SUN212ZUMDL Ford Drive Line Impact Socket
Thexton THE419X GM Engine Moving Tool
Tiger TIG10851 Heavy Duty Automotive Yoke Puller
Tiger TIG20503 Heavy Duty Automotive Universal Joint Kit