Jump and Carry – Choosing the Best Booster Pack

Automotive Shop Tools, jump-n-carry 1 Comment

Summary: In this auto service article we review the Jump and Carry booster pack line-up. These booster packs (jump starters) are manufactured by Clore automotive, which is one of the largest jump box suppliers in the automotive service industry – we cover the reasons why they maintain their top position. Jump and Carry booster boxes are available in several different CCA’s (Cold Cranking Amps) ranges, which allows the auto professional to purchase the size unit that best fits their needs.

Read the rest…

Watch Where You Jump – Dead Car Batteries

Automotive Consumer, General Interest, How To Auto Repair, jump-n-carry 5 Comments

Don't do this...

The way the ground cable is attached in the picture above is incorrect and can cause the small ground wire to overheat from too much current passing through it.

Recently my brother had a dead battery, so I took my jump box to his house to jump start his car. It’s funny how some things are second nature when you’ve done it a thousand times. He had already tried using his new bargain booster box that he had just bought at a local parts store. The less expensive jump boxes usually only have continuity on one jaw of the cable clamp. The better quality jump boxes, like the JNC4000 or JNC 660 have power on both sides of the jaws. When there is power on both sides of the jumper clamps it makes it much easier to get a good connection when jump starting a car. Anyways, my brother properly attached the red battery jumper clamp, from my jump box to the positive side of the battery first. And he knew not to clamp the black jumper lead (from the booster box) directly to the battery’s negative terminal, because a small spark from connecting it there could ignite the vapors from the car battery and cause it to explode. But he made the mistake of hooking the black negative cable from the jump box to a bolt that held a small ground cable to the body of the car. This can force the small gauge body ground straps to carry excessive amps and possibly cause a melt down.

This is better

It’s always better to find a good size bolt head on the engine to connect the negative jumper cable to. For more detailed instructions and warnings see Jump-n-Carry’s pdf instruction manual. A foot note, my brother now knows the right way to jump start his car….and not to leave the dome light on all night.

Linking: Please reference this article when quoting, linking to this page is welcomed and appreciated. If you are new to linking a page. 1. Left click the link; http://www.denlorstools.com/autoblog/2008/06/watch-where-you-jump-dead-car-batteries/ to highlight 2. Right click, select copy 3. Right click and paste to forum, blog web page etc. Thanks! Disclaimer: Repair tips are designed for informational purposes only, without warranty of any kind, in no event shall the author of this site be liable for any consequential, incidental or direct damages sustained in the course of using the information in this article.