This Kia Rio had a severe engine vibration, see the picture below for the cause.

There are several things that can cause an engine to shake. If there is an engine vibration problem, typically it gets worse with the air conditioning turned on since there is more of a load on the engine. In this auto repair article, we will cover several things that can be looked at to help diagnose the problem. Misfires can definitely cause an engine to shake, usually in most late model cars a misfire will almost always be accompanied by a CEL (Check Engine Light) and misfire code. Many times if the engine also stalls, there could be excess carbon build up on the throttle plates or IAC (idle air control motor). Cleaning the throttle body and IAC is a common practice when trying to eliminate possible causes of engines vibrating.

Read the rest…

Unique Ford spark plug design can easily break when removed

When changing Ford spark plugs it’s good to be aware of the potential of breaking them in certain models. In this repair article, find out which ones are susceptible to separating when being removed. Learn how to remove them without breaking them and how to remove them if they do break. Denlors Auto Repair blog has had several articles about removing broken sparkplugs in Ford vehicles. In addition to Rotunda Separated Spark Plug Remover, we offer several less expensive options of removal tools. Compared to Ford Rotunda special service tools, we save our customers a lot of money, when removing broken spark plugs.

Read the rest…

2003 Ford Taurus with a P1131 oxygen sensor fault code 3.0 DOHC

This automotive repair blog covers a couple of common fault codes that sets the SES (Service Engine Soon) or CEL (Check Engine Light) whichever term you prefer to use. The codes are a P1131 or a P1151, the P1131 is related to B1 S1 (Bank 1 Sensor 1) oxygen sensor which is located near the firewall on the 3.0 DOHC Taurus pictured above. The P1151 is related to the bank that is located near the radiator. There are several probable causes of these codes, we’ll cover the possibilities to help in diagnosing this particular problem.

Read the rest…

Visual Optics Video Stik is an excellent choice in video inspection cameras.

The Visual Optics video inspection camera, probably has a million uses. The main use I think of coming from an automotive repair background, is inspecting engine cylinders for damage to valves without taking the engine apart. I know of auto techs that also use these tools to take a quick peak at the brake pads through the car’s wheels, while a vehicle is up in the air for an oil change or some other service. Also checking water pump weep holes can be difficult sometimes, to get a “clear line of sight.” The Video Stik makes it simple to take a quick look past belts and pulleys to see if there is a leak. I personally know a Tampa locksmith that loves his video inspection camera, he uses it routinely to get key codes from the back of door lock cylinders (inside the driver’s door) without the hassle of removing the lock.

Read the rest…

Honda Ridgeline is one of the vehicles affected by TSB 08-045

Honda has always been a little different when its comes to their TSB’s (Technical Service Bulletins). They have used terms that are down to earth, that mechanics can understand easily. Plenty of technical information but without all the technical talk. Honda has now gone above and beyond their previous efforts to inform technicians about issues and fixes. The PDF provided by Honda not only has pictures, it has video and sound!

Read the rest…

Chrysler 300 with only 37,000 miles overheated & towed in

What would cause two cooling fan motors to be out at the same time? One possibility is that they didn’t fail at the same time, one failed and the car was still able to be driven until the other failed also. But two fan motors failing on a car that only has 37,000 miles didn’t make sense either. Obviously power and ground supply was first checked with a power probe to verify the motors were getting the correct input to allow them to run. Once the fan motors were replaced, a terrible ticking noise was heard. More pictures below:

Read the rest…

2000 Ford Expedition P0401 doesn’t necessarily mean the EGR is bad

Don’t replace the EGR (Exhaust Gas Recirculation) valve just yet if you have a P0401 code on a 4.6 liter engine like the one in this Expedition. The diagnostic code definition states “Low flow from E.G.R.” Low flow doesn’t mean definitively that the EGR is bad. Low EGR flow can be a problem in any Ford, Mercury, Lincoln, Mazda and many other car’s for that matter. On a lot of Ford vehicles this code will mean there is a faulty Differential or Delta Pressure Feedback (DPFE) sensor. This was such a common problem there was an extended warranty coverage on them for awhile. Not many people knew about Ford covering these on some models for an extended period of time. At the shop I worked at, an extended warranty company first alerted us to this when they declined an extended warranty claim because Ford would replace it under warranty.

Read the rest…

Wiring can cause door lock problems, switches and actuators are more common

There are several things that can cause the power door locks not to work properly. The most common cause of a single door lock not to work, is a bad door lock actuator (also called a door lock solenoid). Another common problem or cause of door locks not working is simply a bad door lock switch. Many cars today have computers that are also in the loop when it comes to controlling the door locks. Fortunately, body computer systems are pretty dependable and give problems seldomly. It seems as though the most troublesome vehicles regarding door locks related to computer control issues, are Chrysler’s; Dodge Caravan and Chrysler Town & Country vans sometimes have BUS related issues (BUS means “a collection of wires through which data is transmitted from one computer to another”)… but this is still rare. Ford Explorers also have a few BUS issues that can be related to door lock security module, or wiring shorting out that goes from the door into the body. Usually when checked with a scan tool in the body control or security section, there will be a code indicating if there’s a BUS fault.

Read the rest…