Mazda RX8 Flooded, Hard Starting – TSB Procedures

DIY, How To Auto Repair 31 Comments

RX8 Flooding Problem

Flooded in the driveway is a real problem, not so unfamiliar to RX8 owners.

Mazda RX8 is a great sports car with a bad flooding problem (cold starting problems as well). The Rotary engine tends to be flooded very easily if the car is turned off before the engine fully reaches operating temperature. This happens typically when the car is started up and only moved a short distance. There was a recall to recalibrate the PCM, plus a revised leading spark plug number mentioned in this TSB, however the problem still persists in some cars that have had theses updates. Reduced starter life and damaged catalytic converters are a few of the casualties brought on by this car’s flooding problem.

Read the rest…

How to Remove a Heli-Coil

How To Auto Repair 4 Comments


Helicoil Remover

Image courtesy of MustangForums.com

Heli coils are used in many applications when threads are damaged, but what happens if you need to remove one? If the depth of the threads is too long or not long enough there could be a need to remove the Helicoil and install one with the correct length. Also if the threads are rough or you’ve found a better insert to install, removing the Heli-Coil insert could be an obstacle.

Read the rest…